This is a test
↧
Source code checked in, #3e53f1effb55
↧
Commented Issue: Does not Appear on Ribbon [7535]
I just "successfully" installed and downloaded the chem4word add-in, but it is not appearing on my Word ribbon. I am running windows 7 and office 2007. Any ideas? I'd really like to get this working.
Comments: Hi, I have Same Problem. Office 2007; Windows7 ultimate I followed above Steps but i can't fix my problem. I ticked Check box In COM add in BUT, IT CAN"T TAKE EFFECT [See Screen Shot] Plz. Assist TIA. Ravi Vare
Comments: Hi, I have Same Problem. Office 2007; Windows7 ultimate I followed above Steps but i can't fix my problem. I ticked Check box In COM add in BUT, IT CAN"T TAKE EFFECT [See Screen Shot] Plz. Assist TIA. Ravi Vare
↧
↧
Created Unassigned: Cant import from Pubchem [7559]
Hello recently I started using Chem4Word and everything was working fine.
After about a week now when I try to download any chemical from Pubchem I get a 403 server error.
The exact error is:
The remote server returned an error: (403) Forbidden.
I dont know what to do as I have a lab report due quite soon and would like to have nice 2d depictions.
Please help,
Simon
After about a week now when I try to download any chemical from Pubchem I get a 403 server error.
The exact error is:
The remote server returned an error: (403) Forbidden.
I dont know what to do as I have a lab report due quite soon and would like to have nice 2d depictions.
Please help,
Simon
↧
Updated Wiki: Home
Mailing List
We now have a mailing list for Chem4Word. Please subscribe to hear the latest news and to take part in discussions on the future of this product!Version 1.1 Release
This release is the first release under the aegis of the Outercurve Foundation (http://www.outercurve.org/). It is fully compatible with Word 2013 and also fixes some issues with OPSIN and PubChem downloads. Download it now from http://chem4word.codeplex.com/releases/view/102798.This release could not have been possible without Jim Piavis and his team at Microsoft. We'd like to propose a formal vote of thanks for their dedicated effort in getting this released.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2013 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
Version 1.0 release
We are launching the Chemistry Add-in for Microsoft Word v. 1.0 on 1 February 2011 and are also pleased to announce that we have become part of the Outercurve Foundation (http://www.outercurve.org/) in the research accelerators gallery.The release version of the program is available from the downloads page along with the source code as a .ZIP package. The source code is also available under mercurial from the Source Code tab. Since our beta release in March 2010 we have been making several usability improvements including an improved 2D editor, some bug fixes, and also a completely refactored codebase. The package names have been changed to better reflect what they are doing, we have added new packages and we have moved various pieces of code (for example the navigator) from one package to another.
Introduction
The Chem4Word Project (http://research.microsoft.com/chem4word) began in 2008 as a collaboration between Microsoft Research and the University of Cambridge, designed to make it easier to insert and modify chemical information (labels, formulas, 2-D depictions, etc.) from within Microsoft Office Word, and also to have the chemical information stored and manipulated in a semantically rich manner.On March 22, 2010, at the ACS meeting in San Francisco, CA, we announced the availability of a beta build, and we are now launching Chem4Word as an open source project overseen by Dr Joe Townsend.
Future work
We have identified a number of feature areas where we have definite plans for taking the project forward – these fall into two categories; chemical and non-chemical - each of the areas are outlined below in no particular order. In some cases we have already made a start on the code but these are not yet in a working state; in others we have fairly clear ideas as to how we want to progress and we hope that if we provide a very skeleton proof of concept implementation then people with more experience or design skills than us could take them forward. Finally some of the tasks need agreement at a high level as to the direction we should move in and we are engaging with the relevant people and organisations to proceed. We would welcome your feedback in these areas.- Chemical
- 2D layout –if a molecule does not have a complete set of x2 and y2 coordinates on all the atoms then currently we cannot show a 2D representation. We plan implement the algorithm described by Clark et al. in J. Chem. Inf. Model., 2006, 46, 1107-1123 which will allow us to generate 2D representations from the connectivity. Of course as we want to support both high school and university chemistry we will probably need two different layout programs; one for each style. Should the bond angles be 120° or 90°?
- 2D drawing – the current 2D editor allows tweaks and was deliberately envisaged to be different from existing editors. However, we do need to both improve the implementation – how should suggested changes be made? How should the user interact? The ordering of the suggested changes should be responsive to the users history.
- 3D display – there is no 3D viewer in the add-in at present and we want one.
- Converters – at the moment only CML can be imported – but if we have converters then mol, chemdraw, marvin, spectra (JCAMP) etc. could be imported.
- InChI – do we want to be able to generate InChIs as part of the add-in? Should this be available via a web-service? Would authors and/or publishers find it useful?
- PeakList UI – how can a user enter spectral data and associate particular stretches or chemical shifts with bonds and atoms? We have some UI mock-ups already prepared and are working on how the backing CML should hold the data.
- Styles – since the start of the project we have intended to create chemical style sheets; several of our design decisions have been taken deliberately with ChemSS in mind even though so far we haven't even the beginnings of an implementation. Styles would need to be able to hold everything from preferred bond lengths and angles to whether or not methyl groups should be represented as "Me", "CH3" or just a line etc.
- Reactions – we want to support these but how should we. A big area.
- Non chemical
- Test environment – we have a set of unit tests for NUMBO but need to fully test all the code, we want a continuous build and test setup. We are looking at maven at the moment.
- GUI testing – we have a fair amount of GUI and it needs to be tested.
- Command Window – using COA we should be able to perform all the chemical changes which are taking place in the 2D editor and elsewhere; this means we should be able to script things through a command window – possibly used to test as well.
- Vector Graphics – we currently generate PNG images whenever a 2D image is visible on screen (both in the navigator and the document) other than when the molecule is in the 2D editor. This is wasteful (in terms of time) and provides lower quality images than we could otherwise have. We should be using vector graphics throughout.
- Copy/Paste – an implementation that fully works
- Gallery – the gallery uses chem4word.dotx to store molecules which the users places in the gallery. This template is based on normal.dotx and therefore installing the add-in can mess up peoples' formatting. It would be better to simply point to a directory and when view gallery is pressed to show a navigator-like view of all the molecules in this directory. The user can use this to select the molecule in insert.
- Smart Tag – similar changes to the gallery required. Lets pick up the molecules the user already has in their molecule directory.
- Externalise resources – the groups which are suggested in the 2D editor are at present stored in the resources of the NUMBO project. These are just xml/cml files and it would be better to move them to an external location. They would then be easily user customisable.
- Math Zones – the add-in wraps math zones to show chemical text in the document but we have to use different techniques to show chemical text when not in the document. This gives an inconsistent look and feel (and means that we have to maintain more code). Either we should be using math zones everywhere (which many not be possible) or nowhere. Wrapping the math zones is also (we believe) causing problems with allowing us to do direct editing of the chemistry in the document, rather than having to use modal dialogues.
- Ribbon – The ribbon currently uses customUI which is preventing us from having buttons with dynamic content; and we really want these.
- View Port – what if you don't want to show the whole molecule in the document? We would like to implement a view port concept to enable the user to define the viewable portion.
- Hooks into CML – how should third parties get hold of the CML? And how could they make changes and then give it back to us again which some changes?
- RACSO peak lists – the idea behind this is to be able to convert the spectral data entered by the user into the form currently accepted by the publishers (each publisher has a particular and slightly different house style) in the correct format and insert it into the document. Changing the ChemSS would change the formatting.
- Functional programming and performance - the code has been written in a stateless manner which provides an elegant design but is not optimised for performance. This is entirely in keeping with Donald Knuth's "premature optimization is the root of all evil". However Chem4Word has some areas (systems with many rings, interactive drawing) where many identical calculations are repeated and this is evident in performance). This is an area where modern programming methods (e.g. memoization) should be rewarding.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2011 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
This software also makes use of the Microsoft ChemSans and Microsoft ChemSerif font sets which are available at http://research.microsoft.com/chem4word under the Microsoft Research License Agreement.
↧
Created Unassigned: add-in doesn't appear in the ribbon [7560]
i downloaded successfully the add-in and used it a couple of times on office 2013. as the add-in stopped working, i disabled and uninstalled it in order to try and re-install it again. yet the chemistry label, once re-installed the add-in, doesn't appear in the ribbon. i surfed the issues section and i found other people have my same problem: i followed all the suggestions (such as checking the disabled add-in in the options), but it still doesn't work.
i read the problem may be in the windows version (mine is italian). is it possible that the settings have changed after having updated windows 8 to version 8.1? (i updated windows and then re-installed the add-in)
thanks
i read the problem may be in the windows version (mine is italian). is it possible that the settings have changed after having updated windows 8 to version 8.1? (i updated windows and then re-installed the add-in)
thanks
↧
↧
New Post: 403 error; Forbidden when clicking 'Import'
I have been testing Chem4word add-in for MS Word 2010. I have been getting a (403) error when attempting to import a chemical when loading from Pubchem. The URL that I am getting the 403 forbidden error on is eutils.ncbi.nlm.nih.gov. We have created a test environment with no network filtering systems. This allowed us to connect directly to eutils.ncbi.nlm.nih.gov without interference from our end. What else could be causing this? the NIH is a public site and should not be returning forbidden.
Thanks in advance for your time and help.
Thanks in advance for your time and help.
↧
Commented Unassigned: Cant import from Pubchem [7559]
Hello recently I started using Chem4Word and everything was working fine.
After about a week now when I try to download any chemical from Pubchem I get a 403 server error.
The exact error is:
The remote server returned an error: (403) Forbidden.
I dont know what to do as I have a lab report due quite soon and would like to have nice 2d depictions.
Please help,
Simon
Comments: I have the same problem and I receive this error on Windows 7 x64 for Word 2010 and for Word 2013 using Chem4Word 1.1
After about a week now when I try to download any chemical from Pubchem I get a 403 server error.
The exact error is:
The remote server returned an error: (403) Forbidden.
I dont know what to do as I have a lab report due quite soon and would like to have nice 2d depictions.
Please help,
Simon
Comments: I have the same problem and I receive this error on Windows 7 x64 for Word 2010 and for Word 2013 using Chem4Word 1.1
↧
Commented Unassigned: Cant import from Pubchem [7559]
Hello recently I started using Chem4Word and everything was working fine.
After about a week now when I try to download any chemical from Pubchem I get a 403 server error.
The exact error is:
The remote server returned an error: (403) Forbidden.
I dont know what to do as I have a lab report due quite soon and would like to have nice 2d depictions.
Please help,
Simon
Comments: I also still have this issue. It renders chem4word almost useless so I have uninstalled it for now. Its a shame that nobody wants to take hold of matters in their own hands.
After about a week now when I try to download any chemical from Pubchem I get a 403 server error.
The exact error is:
The remote server returned an error: (403) Forbidden.
I dont know what to do as I have a lab report due quite soon and would like to have nice 2d depictions.
Please help,
Simon
Comments: I also still have this issue. It renders chem4word almost useless so I have uninstalled it for now. Its a shame that nobody wants to take hold of matters in their own hands.
↧
Commented Unassigned: Cant import from Pubchem [7559]
Hello recently I started using Chem4Word and everything was working fine.
After about a week now when I try to download any chemical from Pubchem I get a 403 server error.
The exact error is:
The remote server returned an error: (403) Forbidden.
I dont know what to do as I have a lab report due quite soon and would like to have nice 2d depictions.
Please help,
Simon
Comments: I agree, I have also confirmed this error on windows 7 x32 OS with Word 2010.
After about a week now when I try to download any chemical from Pubchem I get a 403 server error.
The exact error is:
The remote server returned an error: (403) Forbidden.
I dont know what to do as I have a lab report due quite soon and would like to have nice 2d depictions.
Please help,
Simon
Comments: I agree, I have also confirmed this error on windows 7 x32 OS with Word 2010.
↧
↧
Commented Unassigned: Cant import from Pubchem [7559]
Hello recently I started using Chem4Word and everything was working fine.
After about a week now when I try to download any chemical from Pubchem I get a 403 server error.
The exact error is:
The remote server returned an error: (403) Forbidden.
I dont know what to do as I have a lab report due quite soon and would like to have nice 2d depictions.
Please help,
Simon
Comments: I'm thinking the issue is in the source code, in Chem4word.UI > Import but im not able to narrow it down further and I'm no expert at all.
After about a week now when I try to download any chemical from Pubchem I get a 403 server error.
The exact error is:
The remote server returned an error: (403) Forbidden.
I dont know what to do as I have a lab report due quite soon and would like to have nice 2d depictions.
Please help,
Simon
Comments: I'm thinking the issue is in the source code, in Chem4word.UI > Import but im not able to narrow it down further and I'm no expert at all.
↧
Updated Wiki: Home
Version 1.5 Beta
Great news! We now have the beta version of Chem4Word ready for testing! We need you to beta test it. The most exciting new feature is integration with the ChemDoodle editor: you can now create your own chemical structures from scratch. There is also improved access to online repositories of chemical structures.If you want to help us beta-test it, download it from http://c4w-beta.azurewebsites.net/ . If you want to post test results, you can use the mailing list at http://mailinglists.outercurve.org/cgi-bin/mailman/listinfo/chem4word . If you want to post results on Facebook, please feel free to do so but add the hashtag #c4wbeta .
Mailing List
We now have a mailing list for Chem4Word. Please subscribe to hear the latest news and to take part in discussions on the future of this product!Version 1.1 Release
This release is the first release under the aegis of the Outercurve Foundation (http://www.outercurve.org/). It is fully compatible with Word 2013 and also fixes some issues with OPSIN and PubChem downloads. Download it now from http://chem4word.codeplex.com/releases/view/102798.This release could not have been possible without Jim Piavis and his team at Microsoft. We'd like to propose a formal vote of thanks for their dedicated effort in getting this released.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2013 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
Version 1.0 release
We are launching the Chemistry Add-in for Microsoft Word v. 1.0 on 1 February 2011 and are also pleased to announce that we have become part of the Outercurve Foundation (http://www.outercurve.org/) in the research accelerators gallery.The release version of the program is available from the downloads page along with the source code as a .ZIP package. The source code is also available under mercurial from the Source Code tab. Since our beta release in March 2010 we have been making several usability improvements including an improved 2D editor, some bug fixes, and also a completely refactored codebase. The package names have been changed to better reflect what they are doing, we have added new packages and we have moved various pieces of code (for example the navigator) from one package to another.
Introduction
The Chem4Word Project (http://research.microsoft.com/chem4word) began in 2008 as a collaboration between Microsoft Research and the University of Cambridge, designed to make it easier to insert and modify chemical information (labels, formulas, 2-D depictions, etc.) from within Microsoft Office Word, and also to have the chemical information stored and manipulated in a semantically rich manner.On March 22, 2010, at the ACS meeting in San Francisco, CA, we announced the availability of a beta build, and we are now launching Chem4Word as an open source project overseen by Dr Joe Townsend.
Future work
We have identified a number of feature areas where we have definite plans for taking the project forward – these fall into two categories; chemical and non-chemical - each of the areas are outlined below in no particular order. In some cases we have already made a start on the code but these are not yet in a working state; in others we have fairly clear ideas as to how we want to progress and we hope that if we provide a very skeleton proof of concept implementation then people with more experience or design skills than us could take them forward. Finally some of the tasks need agreement at a high level as to the direction we should move in and we are engaging with the relevant people and organisations to proceed. We would welcome your feedback in these areas.- Chemical
- 2D layout –if a molecule does not have a complete set of x2 and y2 coordinates on all the atoms then currently we cannot show a 2D representation. We plan implement the algorithm described by Clark et al. in J. Chem. Inf. Model., 2006, 46, 1107-1123 which will allow us to generate 2D representations from the connectivity. Of course as we want to support both high school and university chemistry we will probably need two different layout programs; one for each style. Should the bond angles be 120° or 90°?
- 2D drawing – the current 2D editor allows tweaks and was deliberately envisaged to be different from existing editors. However, we do need to both improve the implementation – how should suggested changes be made? How should the user interact? The ordering of the suggested changes should be responsive to the users history.
- 3D display – there is no 3D viewer in the add-in at present and we want one.
- Converters – at the moment only CML can be imported – but if we have converters then mol, chemdraw, marvin, spectra (JCAMP) etc. could be imported.
- InChI – do we want to be able to generate InChIs as part of the add-in? Should this be available via a web-service? Would authors and/or publishers find it useful?
- PeakList UI – how can a user enter spectral data and associate particular stretches or chemical shifts with bonds and atoms? We have some UI mock-ups already prepared and are working on how the backing CML should hold the data.
- Styles – since the start of the project we have intended to create chemical style sheets; several of our design decisions have been taken deliberately with ChemSS in mind even though so far we haven't even the beginnings of an implementation. Styles would need to be able to hold everything from preferred bond lengths and angles to whether or not methyl groups should be represented as "Me", "CH3" or just a line etc.
- Reactions – we want to support these but how should we. A big area.
- Non chemical
- Test environment – we have a set of unit tests for NUMBO but need to fully test all the code, we want a continuous build and test setup. We are looking at maven at the moment.
- GUI testing – we have a fair amount of GUI and it needs to be tested.
- Command Window – using COA we should be able to perform all the chemical changes which are taking place in the 2D editor and elsewhere; this means we should be able to script things through a command window – possibly used to test as well.
- Vector Graphics – we currently generate PNG images whenever a 2D image is visible on screen (both in the navigator and the document) other than when the molecule is in the 2D editor. This is wasteful (in terms of time) and provides lower quality images than we could otherwise have. We should be using vector graphics throughout.
- Copy/Paste – an implementation that fully works
- Gallery – the gallery uses chem4word.dotx to store molecules which the users places in the gallery. This template is based on normal.dotx and therefore installing the add-in can mess up peoples' formatting. It would be better to simply point to a directory and when view gallery is pressed to show a navigator-like view of all the molecules in this directory. The user can use this to select the molecule in insert.
- Smart Tag – similar changes to the gallery required. Lets pick up the molecules the user already has in their molecule directory.
- Externalise resources – the groups which are suggested in the 2D editor are at present stored in the resources of the NUMBO project. These are just xml/cml files and it would be better to move them to an external location. They would then be easily user customisable.
- Math Zones – the add-in wraps math zones to show chemical text in the document but we have to use different techniques to show chemical text when not in the document. This gives an inconsistent look and feel (and means that we have to maintain more code). Either we should be using math zones everywhere (which many not be possible) or nowhere. Wrapping the math zones is also (we believe) causing problems with allowing us to do direct editing of the chemistry in the document, rather than having to use modal dialogues.
- Ribbon – The ribbon currently uses customUI which is preventing us from having buttons with dynamic content; and we really want these.
- View Port – what if you don't want to show the whole molecule in the document? We would like to implement a view port concept to enable the user to define the viewable portion.
- Hooks into CML – how should third parties get hold of the CML? And how could they make changes and then give it back to us again which some changes?
- RACSO peak lists – the idea behind this is to be able to convert the spectral data entered by the user into the form currently accepted by the publishers (each publisher has a particular and slightly different house style) in the correct format and insert it into the document. Changing the ChemSS would change the formatting.
- Functional programming and performance - the code has been written in a stateless manner which provides an elegant design but is not optimised for performance. This is entirely in keeping with Donald Knuth's "premature optimization is the root of all evil". However Chem4Word has some areas (systems with many rings, interactive drawing) where many identical calculations are repeated and this is evident in performance). This is an area where modern programming methods (e.g. memoization) should be rewarding.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2011 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
This software also makes use of the Microsoft ChemSans and Microsoft ChemSerif font sets which are available at http://research.microsoft.com/chem4word under the Microsoft Research License Agreement.
↧
Updated Wiki: Home
Version 1.5 Beta
Great news! We now have the beta version of Chem4Word ready for testing! We need you to beta test it. The most exciting new feature is integration with the ChemDoodle editor: you can now create your own chemical structures from scratch. There is also improved access to online repositories of chemical structures.If you want to help us beta-test it, download it from http://c4w-beta.azurewebsites.net/ . The sip password is J2lNwel5QCTGEj71qRx2. If you want to post test results, you can use the mailing list at http://mailinglists.outercurve.org/cgi-bin/mailman/listinfo/chem4word . If you want to post results on Facebook, please feel free to do so but add the hashtag #c4wbeta .
Mailing List
We now have a mailing list for Chem4Word. Please subscribe to hear the latest news and to take part in discussions on the future of this product!Version 1.1 Release
This release is the first release under the aegis of the Outercurve Foundation (http://www.outercurve.org/). It is fully compatible with Word 2013 and also fixes some issues with OPSIN and PubChem downloads. Download it now from http://chem4word.codeplex.com/releases/view/102798.This release could not have been possible without Jim Piavis and his team at Microsoft. We'd like to propose a formal vote of thanks for their dedicated effort in getting this released.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2013 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
Version 1.0 release
We are launching the Chemistry Add-in for Microsoft Word v. 1.0 on 1 February 2011 and are also pleased to announce that we have become part of the Outercurve Foundation (http://www.outercurve.org/) in the research accelerators gallery.The release version of the program is available from the downloads page along with the source code as a .ZIP package. The source code is also available under mercurial from the Source Code tab. Since our beta release in March 2010 we have been making several usability improvements including an improved 2D editor, some bug fixes, and also a completely refactored codebase. The package names have been changed to better reflect what they are doing, we have added new packages and we have moved various pieces of code (for example the navigator) from one package to another.
Introduction
The Chem4Word Project (http://research.microsoft.com/chem4word) began in 2008 as a collaboration between Microsoft Research and the University of Cambridge, designed to make it easier to insert and modify chemical information (labels, formulas, 2-D depictions, etc.) from within Microsoft Office Word, and also to have the chemical information stored and manipulated in a semantically rich manner.On March 22, 2010, at the ACS meeting in San Francisco, CA, we announced the availability of a beta build, and we are now launching Chem4Word as an open source project overseen by Dr Joe Townsend.
Future work
We have identified a number of feature areas where we have definite plans for taking the project forward – these fall into two categories; chemical and non-chemical - each of the areas are outlined below in no particular order. In some cases we have already made a start on the code but these are not yet in a working state; in others we have fairly clear ideas as to how we want to progress and we hope that if we provide a very skeleton proof of concept implementation then people with more experience or design skills than us could take them forward. Finally some of the tasks need agreement at a high level as to the direction we should move in and we are engaging with the relevant people and organisations to proceed. We would welcome your feedback in these areas.- Chemical
- 2D layout –if a molecule does not have a complete set of x2 and y2 coordinates on all the atoms then currently we cannot show a 2D representation. We plan implement the algorithm described by Clark et al. in J. Chem. Inf. Model., 2006, 46, 1107-1123 which will allow us to generate 2D representations from the connectivity. Of course as we want to support both high school and university chemistry we will probably need two different layout programs; one for each style. Should the bond angles be 120° or 90°?
- 2D drawing – the current 2D editor allows tweaks and was deliberately envisaged to be different from existing editors. However, we do need to both improve the implementation – how should suggested changes be made? How should the user interact? The ordering of the suggested changes should be responsive to the users history.
- 3D display – there is no 3D viewer in the add-in at present and we want one.
- Converters – at the moment only CML can be imported – but if we have converters then mol, chemdraw, marvin, spectra (JCAMP) etc. could be imported.
- InChI – do we want to be able to generate InChIs as part of the add-in? Should this be available via a web-service? Would authors and/or publishers find it useful?
- PeakList UI – how can a user enter spectral data and associate particular stretches or chemical shifts with bonds and atoms? We have some UI mock-ups already prepared and are working on how the backing CML should hold the data.
- Styles – since the start of the project we have intended to create chemical style sheets; several of our design decisions have been taken deliberately with ChemSS in mind even though so far we haven't even the beginnings of an implementation. Styles would need to be able to hold everything from preferred bond lengths and angles to whether or not methyl groups should be represented as "Me", "CH3" or just a line etc.
- Reactions – we want to support these but how should we. A big area.
- Non chemical
- Test environment – we have a set of unit tests for NUMBO but need to fully test all the code, we want a continuous build and test setup. We are looking at maven at the moment.
- GUI testing – we have a fair amount of GUI and it needs to be tested.
- Command Window – using COA we should be able to perform all the chemical changes which are taking place in the 2D editor and elsewhere; this means we should be able to script things through a command window – possibly used to test as well.
- Vector Graphics – we currently generate PNG images whenever a 2D image is visible on screen (both in the navigator and the document) other than when the molecule is in the 2D editor. This is wasteful (in terms of time) and provides lower quality images than we could otherwise have. We should be using vector graphics throughout.
- Copy/Paste – an implementation that fully works
- Gallery – the gallery uses chem4word.dotx to store molecules which the users places in the gallery. This template is based on normal.dotx and therefore installing the add-in can mess up peoples' formatting. It would be better to simply point to a directory and when view gallery is pressed to show a navigator-like view of all the molecules in this directory. The user can use this to select the molecule in insert.
- Smart Tag – similar changes to the gallery required. Lets pick up the molecules the user already has in their molecule directory.
- Externalise resources – the groups which are suggested in the 2D editor are at present stored in the resources of the NUMBO project. These are just xml/cml files and it would be better to move them to an external location. They would then be easily user customisable.
- Math Zones – the add-in wraps math zones to show chemical text in the document but we have to use different techniques to show chemical text when not in the document. This gives an inconsistent look and feel (and means that we have to maintain more code). Either we should be using math zones everywhere (which many not be possible) or nowhere. Wrapping the math zones is also (we believe) causing problems with allowing us to do direct editing of the chemistry in the document, rather than having to use modal dialogues.
- Ribbon – The ribbon currently uses customUI which is preventing us from having buttons with dynamic content; and we really want these.
- View Port – what if you don't want to show the whole molecule in the document? We would like to implement a view port concept to enable the user to define the viewable portion.
- Hooks into CML – how should third parties get hold of the CML? And how could they make changes and then give it back to us again which some changes?
- RACSO peak lists – the idea behind this is to be able to convert the spectral data entered by the user into the form currently accepted by the publishers (each publisher has a particular and slightly different house style) in the correct format and insert it into the document. Changing the ChemSS would change the formatting.
- Functional programming and performance - the code has been written in a stateless manner which provides an elegant design but is not optimised for performance. This is entirely in keeping with Donald Knuth's "premature optimization is the root of all evil". However Chem4Word has some areas (systems with many rings, interactive drawing) where many identical calculations are repeated and this is evident in performance). This is an area where modern programming methods (e.g. memoization) should be rewarding.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2011 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
This software also makes use of the Microsoft ChemSans and Microsoft ChemSerif font sets which are available at http://research.microsoft.com/chem4word under the Microsoft Research License Agreement.
↧
Updated Wiki: Home
Version 1.5 Beta
Great news! We now have the beta version of Chem4Word ready for testing! We need you to beta test it. The most exciting new feature is integration with the ChemDoodle editor: you can now create your own chemical structures from scratch. There is also improved access to online repositories of chemical structures.If you want to help us beta-test it, download it from http://c4w-beta.azurewebsites.net/ . The zip password is J2lNwel5QCTGEj71qRx2. If you want to post test results, you can use the mailing list at http://mailinglists.outercurve.org/cgi-bin/mailman/listinfo/chem4word . If you want to post results on Facebook, please feel free to do so but add the hashtag #c4wbeta .
Mailing List
We now have a mailing list for Chem4Word. Please subscribe to hear the latest news and to take part in discussions on the future of this product!Version 1.1 Release
This release is the first release under the aegis of the Outercurve Foundation (http://www.outercurve.org/). It is fully compatible with Word 2013 and also fixes some issues with OPSIN and PubChem downloads. Download it now from http://chem4word.codeplex.com/releases/view/102798.This release could not have been possible without Jim Piavis and his team at Microsoft. We'd like to propose a formal vote of thanks for their dedicated effort in getting this released.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2013 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
Version 1.0 release
We are launching the Chemistry Add-in for Microsoft Word v. 1.0 on 1 February 2011 and are also pleased to announce that we have become part of the Outercurve Foundation (http://www.outercurve.org/) in the research accelerators gallery.The release version of the program is available from the downloads page along with the source code as a .ZIP package. The source code is also available under mercurial from the Source Code tab. Since our beta release in March 2010 we have been making several usability improvements including an improved 2D editor, some bug fixes, and also a completely refactored codebase. The package names have been changed to better reflect what they are doing, we have added new packages and we have moved various pieces of code (for example the navigator) from one package to another.
Introduction
The Chem4Word Project (http://research.microsoft.com/chem4word) began in 2008 as a collaboration between Microsoft Research and the University of Cambridge, designed to make it easier to insert and modify chemical information (labels, formulas, 2-D depictions, etc.) from within Microsoft Office Word, and also to have the chemical information stored and manipulated in a semantically rich manner.On March 22, 2010, at the ACS meeting in San Francisco, CA, we announced the availability of a beta build, and we are now launching Chem4Word as an open source project overseen by Dr Joe Townsend.
Future work
We have identified a number of feature areas where we have definite plans for taking the project forward – these fall into two categories; chemical and non-chemical - each of the areas are outlined below in no particular order. In some cases we have already made a start on the code but these are not yet in a working state; in others we have fairly clear ideas as to how we want to progress and we hope that if we provide a very skeleton proof of concept implementation then people with more experience or design skills than us could take them forward. Finally some of the tasks need agreement at a high level as to the direction we should move in and we are engaging with the relevant people and organisations to proceed. We would welcome your feedback in these areas.- Chemical
- 2D layout –if a molecule does not have a complete set of x2 and y2 coordinates on all the atoms then currently we cannot show a 2D representation. We plan implement the algorithm described by Clark et al. in J. Chem. Inf. Model., 2006, 46, 1107-1123 which will allow us to generate 2D representations from the connectivity. Of course as we want to support both high school and university chemistry we will probably need two different layout programs; one for each style. Should the bond angles be 120° or 90°?
- 2D drawing – the current 2D editor allows tweaks and was deliberately envisaged to be different from existing editors. However, we do need to both improve the implementation – how should suggested changes be made? How should the user interact? The ordering of the suggested changes should be responsive to the users history.
- 3D display – there is no 3D viewer in the add-in at present and we want one.
- Converters – at the moment only CML can be imported – but if we have converters then mol, chemdraw, marvin, spectra (JCAMP) etc. could be imported.
- InChI – do we want to be able to generate InChIs as part of the add-in? Should this be available via a web-service? Would authors and/or publishers find it useful?
- PeakList UI – how can a user enter spectral data and associate particular stretches or chemical shifts with bonds and atoms? We have some UI mock-ups already prepared and are working on how the backing CML should hold the data.
- Styles – since the start of the project we have intended to create chemical style sheets; several of our design decisions have been taken deliberately with ChemSS in mind even though so far we haven't even the beginnings of an implementation. Styles would need to be able to hold everything from preferred bond lengths and angles to whether or not methyl groups should be represented as "Me", "CH3" or just a line etc.
- Reactions – we want to support these but how should we. A big area.
- Non chemical
- Test environment – we have a set of unit tests for NUMBO but need to fully test all the code, we want a continuous build and test setup. We are looking at maven at the moment.
- GUI testing – we have a fair amount of GUI and it needs to be tested.
- Command Window – using COA we should be able to perform all the chemical changes which are taking place in the 2D editor and elsewhere; this means we should be able to script things through a command window – possibly used to test as well.
- Vector Graphics – we currently generate PNG images whenever a 2D image is visible on screen (both in the navigator and the document) other than when the molecule is in the 2D editor. This is wasteful (in terms of time) and provides lower quality images than we could otherwise have. We should be using vector graphics throughout.
- Copy/Paste – an implementation that fully works
- Gallery – the gallery uses chem4word.dotx to store molecules which the users places in the gallery. This template is based on normal.dotx and therefore installing the add-in can mess up peoples' formatting. It would be better to simply point to a directory and when view gallery is pressed to show a navigator-like view of all the molecules in this directory. The user can use this to select the molecule in insert.
- Smart Tag – similar changes to the gallery required. Lets pick up the molecules the user already has in their molecule directory.
- Externalise resources – the groups which are suggested in the 2D editor are at present stored in the resources of the NUMBO project. These are just xml/cml files and it would be better to move them to an external location. They would then be easily user customisable.
- Math Zones – the add-in wraps math zones to show chemical text in the document but we have to use different techniques to show chemical text when not in the document. This gives an inconsistent look and feel (and means that we have to maintain more code). Either we should be using math zones everywhere (which many not be possible) or nowhere. Wrapping the math zones is also (we believe) causing problems with allowing us to do direct editing of the chemistry in the document, rather than having to use modal dialogues.
- Ribbon – The ribbon currently uses customUI which is preventing us from having buttons with dynamic content; and we really want these.
- View Port – what if you don't want to show the whole molecule in the document? We would like to implement a view port concept to enable the user to define the viewable portion.
- Hooks into CML – how should third parties get hold of the CML? And how could they make changes and then give it back to us again which some changes?
- RACSO peak lists – the idea behind this is to be able to convert the spectral data entered by the user into the form currently accepted by the publishers (each publisher has a particular and slightly different house style) in the correct format and insert it into the document. Changing the ChemSS would change the formatting.
- Functional programming and performance - the code has been written in a stateless manner which provides an elegant design but is not optimised for performance. This is entirely in keeping with Donald Knuth's "premature optimization is the root of all evil". However Chem4Word has some areas (systems with many rings, interactive drawing) where many identical calculations are repeated and this is evident in performance). This is an area where modern programming methods (e.g. memoization) should be rewarding.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2011 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
This software also makes use of the Microsoft ChemSans and Microsoft ChemSerif font sets which are available at http://research.microsoft.com/chem4word under the Microsoft Research License Agreement.
↧
↧
Created Release: Chem4Word 1.5 Beta (Feb 05, 2014)
This is a beta version of the new Chem4Word software. It includes enhanced chemical editing functionality and interaction with public repositories.
↧
Updated Wiki: Home
Version 1.5 Beta
Great news! We now have the beta version of Chem4Word ready for testing! We need you to beta test it. The most exciting new feature is integration with the ChemDoodle editor: you can now create your own chemical structures from scratch. There is also improved access to online repositories of chemical structures.If you want to help us beta-test it, download it from https://chem4word.codeplex.com/releases/view/118025 . If you want to post test results, you can use the mailing list at http://mailinglists.outercurve.org/cgi-bin/mailman/listinfo/chem4word . If you want to post results here, please feel free to do so but add the hashtag #c4wbeta .
Mailing List
We now have a mailing list for Chem4Word. Please subscribe to hear the latest news and to take part in discussions on the future of this product!Version 1.1 Release
This release is the first release under the aegis of the Outercurve Foundation (http://www.outercurve.org/). It is fully compatible with Word 2013 and also fixes some issues with OPSIN and PubChem downloads. Download it now from http://chem4word.codeplex.com/releases/view/102798.This release could not have been possible without Jim Piavis and his team at Microsoft. We'd like to propose a formal vote of thanks for their dedicated effort in getting this released.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2013 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
Version 1.0 release
We are launching the Chemistry Add-in for Microsoft Word v. 1.0 on 1 February 2011 and are also pleased to announce that we have become part of the Outercurve Foundation (http://www.outercurve.org/) in the research accelerators gallery.The release version of the program is available from the downloads page along with the source code as a .ZIP package. The source code is also available under mercurial from the Source Code tab. Since our beta release in March 2010 we have been making several usability improvements including an improved 2D editor, some bug fixes, and also a completely refactored codebase. The package names have been changed to better reflect what they are doing, we have added new packages and we have moved various pieces of code (for example the navigator) from one package to another.
Introduction
The Chem4Word Project (http://research.microsoft.com/chem4word) began in 2008 as a collaboration between Microsoft Research and the University of Cambridge, designed to make it easier to insert and modify chemical information (labels, formulas, 2-D depictions, etc.) from within Microsoft Office Word, and also to have the chemical information stored and manipulated in a semantically rich manner.On March 22, 2010, at the ACS meeting in San Francisco, CA, we announced the availability of a beta build, and we are now launching Chem4Word as an open source project overseen by Dr Joe Townsend.
Future work
We have identified a number of feature areas where we have definite plans for taking the project forward – these fall into two categories; chemical and non-chemical - each of the areas are outlined below in no particular order. In some cases we have already made a start on the code but these are not yet in a working state; in others we have fairly clear ideas as to how we want to progress and we hope that if we provide a very skeleton proof of concept implementation then people with more experience or design skills than us could take them forward. Finally some of the tasks need agreement at a high level as to the direction we should move in and we are engaging with the relevant people and organisations to proceed. We would welcome your feedback in these areas.- Chemical
- 2D layout –if a molecule does not have a complete set of x2 and y2 coordinates on all the atoms then currently we cannot show a 2D representation. We plan implement the algorithm described by Clark et al. in J. Chem. Inf. Model., 2006, 46, 1107-1123 which will allow us to generate 2D representations from the connectivity. Of course as we want to support both high school and university chemistry we will probably need two different layout programs; one for each style. Should the bond angles be 120° or 90°?
- 2D drawing – the current 2D editor allows tweaks and was deliberately envisaged to be different from existing editors. However, we do need to both improve the implementation – how should suggested changes be made? How should the user interact? The ordering of the suggested changes should be responsive to the users history.
- 3D display – there is no 3D viewer in the add-in at present and we want one.
- Converters – at the moment only CML can be imported – but if we have converters then mol, chemdraw, marvin, spectra (JCAMP) etc. could be imported.
- InChI – do we want to be able to generate InChIs as part of the add-in? Should this be available via a web-service? Would authors and/or publishers find it useful?
- PeakList UI – how can a user enter spectral data and associate particular stretches or chemical shifts with bonds and atoms? We have some UI mock-ups already prepared and are working on how the backing CML should hold the data.
- Styles – since the start of the project we have intended to create chemical style sheets; several of our design decisions have been taken deliberately with ChemSS in mind even though so far we haven't even the beginnings of an implementation. Styles would need to be able to hold everything from preferred bond lengths and angles to whether or not methyl groups should be represented as "Me", "CH3" or just a line etc.
- Reactions – we want to support these but how should we. A big area.
- Non chemical
- Test environment – we have a set of unit tests for NUMBO but need to fully test all the code, we want a continuous build and test setup. We are looking at maven at the moment.
- GUI testing – we have a fair amount of GUI and it needs to be tested.
- Command Window – using COA we should be able to perform all the chemical changes which are taking place in the 2D editor and elsewhere; this means we should be able to script things through a command window – possibly used to test as well.
- Vector Graphics – we currently generate PNG images whenever a 2D image is visible on screen (both in the navigator and the document) other than when the molecule is in the 2D editor. This is wasteful (in terms of time) and provides lower quality images than we could otherwise have. We should be using vector graphics throughout.
- Copy/Paste – an implementation that fully works
- Gallery – the gallery uses chem4word.dotx to store molecules which the users places in the gallery. This template is based on normal.dotx and therefore installing the add-in can mess up peoples' formatting. It would be better to simply point to a directory and when view gallery is pressed to show a navigator-like view of all the molecules in this directory. The user can use this to select the molecule in insert.
- Smart Tag – similar changes to the gallery required. Lets pick up the molecules the user already has in their molecule directory.
- Externalise resources – the groups which are suggested in the 2D editor are at present stored in the resources of the NUMBO project. These are just xml/cml files and it would be better to move them to an external location. They would then be easily user customisable.
- Math Zones – the add-in wraps math zones to show chemical text in the document but we have to use different techniques to show chemical text when not in the document. This gives an inconsistent look and feel (and means that we have to maintain more code). Either we should be using math zones everywhere (which many not be possible) or nowhere. Wrapping the math zones is also (we believe) causing problems with allowing us to do direct editing of the chemistry in the document, rather than having to use modal dialogues.
- Ribbon – The ribbon currently uses customUI which is preventing us from having buttons with dynamic content; and we really want these.
- View Port – what if you don't want to show the whole molecule in the document? We would like to implement a view port concept to enable the user to define the viewable portion.
- Hooks into CML – how should third parties get hold of the CML? And how could they make changes and then give it back to us again which some changes?
- RACSO peak lists – the idea behind this is to be able to convert the spectral data entered by the user into the form currently accepted by the publishers (each publisher has a particular and slightly different house style) in the correct format and insert it into the document. Changing the ChemSS would change the formatting.
- Functional programming and performance - the code has been written in a stateless manner which provides an elegant design but is not optimised for performance. This is entirely in keeping with Donald Knuth's "premature optimization is the root of all evil". However Chem4Word has some areas (systems with many rings, interactive drawing) where many identical calculations are repeated and this is evident in performance). This is an area where modern programming methods (e.g. memoization) should be rewarding.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2011 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
This software also makes use of the Microsoft ChemSans and Microsoft ChemSerif font sets which are available at http://research.microsoft.com/chem4word under the Microsoft Research License Agreement.
↧
Updated Wiki: Home
Version 1.5 Beta
Great news! We now have the beta version of Chem4Word ready for testing! We need you to beta test it. The most exciting new feature is integration with the ChemDoodle editor: you can now create your own chemical structures from scratch. There is also improved access to online repositories of chemical structures.If you want to help us beta-test it, download it from https://chem4word.codeplex.com/releases/view/118025 . If you want to post test results, you can use the mailing list at http://mailinglists.outercurve.org/cgi-bin/mailman/listinfo/chem4word . If you want to post results on FaceBook, please feel free to do so but add the hashtag #c4wbeta .
Mailing List
We now have a mailing list for Chem4Word. Please subscribe to hear the latest news and to take part in discussions on the future of this product!Version 1.1 Release
This release is the first release under the aegis of the Outercurve Foundation (http://www.outercurve.org/). It is fully compatible with Word 2013 and also fixes some issues with OPSIN and PubChem downloads. Download it now from http://chem4word.codeplex.com/releases/view/102798.This release could not have been possible without Jim Piavis and his team at Microsoft. We'd like to propose a formal vote of thanks for their dedicated effort in getting this released.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2013 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
Version 1.0 release
We are launching the Chemistry Add-in for Microsoft Word v. 1.0 on 1 February 2011 and are also pleased to announce that we have become part of the Outercurve Foundation (http://www.outercurve.org/) in the research accelerators gallery.The release version of the program is available from the downloads page along with the source code as a .ZIP package. The source code is also available under mercurial from the Source Code tab. Since our beta release in March 2010 we have been making several usability improvements including an improved 2D editor, some bug fixes, and also a completely refactored codebase. The package names have been changed to better reflect what they are doing, we have added new packages and we have moved various pieces of code (for example the navigator) from one package to another.
Introduction
The Chem4Word Project (http://research.microsoft.com/chem4word) began in 2008 as a collaboration between Microsoft Research and the University of Cambridge, designed to make it easier to insert and modify chemical information (labels, formulas, 2-D depictions, etc.) from within Microsoft Office Word, and also to have the chemical information stored and manipulated in a semantically rich manner.On March 22, 2010, at the ACS meeting in San Francisco, CA, we announced the availability of a beta build, and we are now launching Chem4Word as an open source project overseen by Dr Joe Townsend.
Future work
We have identified a number of feature areas where we have definite plans for taking the project forward – these fall into two categories; chemical and non-chemical - each of the areas are outlined below in no particular order. In some cases we have already made a start on the code but these are not yet in a working state; in others we have fairly clear ideas as to how we want to progress and we hope that if we provide a very skeleton proof of concept implementation then people with more experience or design skills than us could take them forward. Finally some of the tasks need agreement at a high level as to the direction we should move in and we are engaging with the relevant people and organisations to proceed. We would welcome your feedback in these areas.- Chemical
- 2D layout –if a molecule does not have a complete set of x2 and y2 coordinates on all the atoms then currently we cannot show a 2D representation. We plan implement the algorithm described by Clark et al. in J. Chem. Inf. Model., 2006, 46, 1107-1123 which will allow us to generate 2D representations from the connectivity. Of course as we want to support both high school and university chemistry we will probably need two different layout programs; one for each style. Should the bond angles be 120° or 90°?
- 2D drawing – the current 2D editor allows tweaks and was deliberately envisaged to be different from existing editors. However, we do need to both improve the implementation – how should suggested changes be made? How should the user interact? The ordering of the suggested changes should be responsive to the users history.
- 3D display – there is no 3D viewer in the add-in at present and we want one.
- Converters – at the moment only CML can be imported – but if we have converters then mol, chemdraw, marvin, spectra (JCAMP) etc. could be imported.
- InChI – do we want to be able to generate InChIs as part of the add-in? Should this be available via a web-service? Would authors and/or publishers find it useful?
- PeakList UI – how can a user enter spectral data and associate particular stretches or chemical shifts with bonds and atoms? We have some UI mock-ups already prepared and are working on how the backing CML should hold the data.
- Styles – since the start of the project we have intended to create chemical style sheets; several of our design decisions have been taken deliberately with ChemSS in mind even though so far we haven't even the beginnings of an implementation. Styles would need to be able to hold everything from preferred bond lengths and angles to whether or not methyl groups should be represented as "Me", "CH3" or just a line etc.
- Reactions – we want to support these but how should we. A big area.
- Non chemical
- Test environment – we have a set of unit tests for NUMBO but need to fully test all the code, we want a continuous build and test setup. We are looking at maven at the moment.
- GUI testing – we have a fair amount of GUI and it needs to be tested.
- Command Window – using COA we should be able to perform all the chemical changes which are taking place in the 2D editor and elsewhere; this means we should be able to script things through a command window – possibly used to test as well.
- Vector Graphics – we currently generate PNG images whenever a 2D image is visible on screen (both in the navigator and the document) other than when the molecule is in the 2D editor. This is wasteful (in terms of time) and provides lower quality images than we could otherwise have. We should be using vector graphics throughout.
- Copy/Paste – an implementation that fully works
- Gallery – the gallery uses chem4word.dotx to store molecules which the users places in the gallery. This template is based on normal.dotx and therefore installing the add-in can mess up peoples' formatting. It would be better to simply point to a directory and when view gallery is pressed to show a navigator-like view of all the molecules in this directory. The user can use this to select the molecule in insert.
- Smart Tag – similar changes to the gallery required. Lets pick up the molecules the user already has in their molecule directory.
- Externalise resources – the groups which are suggested in the 2D editor are at present stored in the resources of the NUMBO project. These are just xml/cml files and it would be better to move them to an external location. They would then be easily user customisable.
- Math Zones – the add-in wraps math zones to show chemical text in the document but we have to use different techniques to show chemical text when not in the document. This gives an inconsistent look and feel (and means that we have to maintain more code). Either we should be using math zones everywhere (which many not be possible) or nowhere. Wrapping the math zones is also (we believe) causing problems with allowing us to do direct editing of the chemistry in the document, rather than having to use modal dialogues.
- Ribbon – The ribbon currently uses customUI which is preventing us from having buttons with dynamic content; and we really want these.
- View Port – what if you don't want to show the whole molecule in the document? We would like to implement a view port concept to enable the user to define the viewable portion.
- Hooks into CML – how should third parties get hold of the CML? And how could they make changes and then give it back to us again which some changes?
- RACSO peak lists – the idea behind this is to be able to convert the spectral data entered by the user into the form currently accepted by the publishers (each publisher has a particular and slightly different house style) in the correct format and insert it into the document. Changing the ChemSS would change the formatting.
- Functional programming and performance - the code has been written in a stateless manner which provides an elegant design but is not optimised for performance. This is entirely in keeping with Donald Knuth's "premature optimization is the root of all evil". However Chem4Word has some areas (systems with many rings, interactive drawing) where many identical calculations are repeated and this is evident in performance). This is an area where modern programming methods (e.g. memoization) should be rewarding.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2011 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
This software also makes use of the Microsoft ChemSans and Microsoft ChemSerif font sets which are available at http://research.microsoft.com/chem4word under the Microsoft Research License Agreement.
↧
Released: Chemistry Add-in for Word version 1.5 (Feb 03, 2014)
Clyde to add some words here
↧
↧
Updated Release: Chemistry Add-in for Word version 1.5 (Feb 03, 2014)
Clyde to add some words here
↧
Updated Wiki: Home
Version 1.5 Beta
Great news! We now have the beta version of Chem4Word ready for testing! We need you to beta test it. The most exciting new feature is integration with the ChemDoodle editor: you can now create your own chemical structures from scratch. There is also improved access to online repositories of chemical structures.If you want to help us beta-test it, download it from https://chem4word.codeplex.com/releases/view/118025 . If you want to post test results, you can use the mailing list at http://mailinglists.outercurve.org/cgi-bin/mailman/listinfo/chem4word . If you want to post results on FaceBook, please feel free to do so but add the hashtag #c4wbeta .
Mailing List
We now have a mailing list for Chem4Word. Please subscribe to hear the latest news and to take part in discussions on the future of this product!Version 1.1 Release
This release is the first release under the aegis of the Outercurve Foundation (http://www.outercurve.org/). It is fully compatible with Word 2013 and also fixes some issues with OPSIN and PubChem downloads. Download it now from http://chem4word.codeplex.com/releases/view/102798.This release could not have been possible without Jim Piavis and his team at Microsoft. We'd like to propose a formal vote of thanks for their dedicated effort in getting this released.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2013 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
Version 1.0 release
We are launching the Chemistry Add-in for Microsoft Word v. 1.0 on 1 February 2011 and are also pleased to announce that we have become part of the Outercurve Foundation (http://www.outercurve.org/) in the research accelerators gallery.The release version of the program is available from the downloads page along with the source code as a .ZIP package. The source code is also available under mercurial from the Source Code tab. Since our beta release in March 2010 we have been making several usability improvements including an improved 2D editor, some bug fixes, and also a completely refactored codebase. The package names have been changed to better reflect what they are doing, we have added new packages and we have moved various pieces of code (for example the navigator) from one package to another.
Introduction
The Chem4Word Project (http://research.microsoft.com/chem4word) began in 2008 as a collaboration between Microsoft Research and the University of Cambridge, designed to make it easier to insert and modify chemical information (labels, formulas, 2-D depictions, etc.) from within Microsoft Office Word, and also to have the chemical information stored and manipulated in a semantically rich manner.On March 22, 2010, at the ACS meeting in San Francisco, CA, we announced the availability of a beta build, and we are now launching Chem4Word as an open source project overseen by Dr Joe Townsend.
Future work
We have identified a number of feature areas where we have definite plans for taking the project forward – these fall into two categories; chemical and non-chemical - each of the areas are outlined below in no particular order. In some cases we have already made a start on the code but these are not yet in a working state; in others we have fairly clear ideas as to how we want to progress and we hope that if we provide a very skeleton proof of concept implementation then people with more experience or design skills than us could take them forward. Finally some of the tasks need agreement at a high level as to the direction we should move in and we are engaging with the relevant people and organisations to proceed. We would welcome your feedback in these areas.- Chemical
- 2D layout –if a molecule does not have a complete set of x2 and y2 coordinates on all the atoms then currently we cannot show a 2D representation. We plan implement the algorithm described by Clark et al. in J. Chem. Inf. Model., 2006, 46, 1107-1123 which will allow us to generate 2D representations from the connectivity. Of course as we want to support both high school and university chemistry we will probably need two different layout programs; one for each style. Should the bond angles be 120° or 90°?
- 2D drawing – the current 2D editor allows tweaks and was deliberately envisaged to be different from existing editors. However, we do need to both improve the implementation – how should suggested changes be made? How should the user interact? The ordering of the suggested changes should be responsive to the users history.
- 3D display – there is no 3D viewer in the add-in at present and we want one.
- Converters – at the moment only CML can be imported – but if we have converters then mol, chemdraw, marvin, spectra (JCAMP) etc. could be imported.
- InChI – do we want to be able to generate InChIs as part of the add-in? Should this be available via a web-service? Would authors and/or publishers find it useful?
- PeakList UI – how can a user enter spectral data and associate particular stretches or chemical shifts with bonds and atoms? We have some UI mock-ups already prepared and are working on how the backing CML should hold the data.
- Styles – since the start of the project we have intended to create chemical style sheets; several of our design decisions have been taken deliberately with ChemSS in mind even though so far we haven't even the beginnings of an implementation. Styles would need to be able to hold everything from preferred bond lengths and angles to whether or not methyl groups should be represented as "Me", "CH3" or just a line etc.
- Reactions – we want to support these but how should we. A big area.
- Non chemical
- Test environment – we have a set of unit tests for NUMBO but need to fully test all the code, we want a continuous build and test setup. We are looking at maven at the moment.
- GUI testing – we have a fair amount of GUI and it needs to be tested.
- Command Window – using COA we should be able to perform all the chemical changes which are taking place in the 2D editor and elsewhere; this means we should be able to script things through a command window – possibly used to test as well.
- Vector Graphics – we currently generate PNG images whenever a 2D image is visible on screen (both in the navigator and the document) other than when the molecule is in the 2D editor. This is wasteful (in terms of time) and provides lower quality images than we could otherwise have. We should be using vector graphics throughout.
- Copy/Paste – an implementation that fully works
- Gallery – the gallery uses chem4word.dotx to store molecules which the users places in the gallery. This template is based on normal.dotx and therefore installing the add-in can mess up peoples' formatting. It would be better to simply point to a directory and when view gallery is pressed to show a navigator-like view of all the molecules in this directory. The user can use this to select the molecule in insert.
- Smart Tag – similar changes to the gallery required. Lets pick up the molecules the user already has in their molecule directory.
- Externalise resources – the groups which are suggested in the 2D editor are at present stored in the resources of the NUMBO project. These are just xml/cml files and it would be better to move them to an external location. They would then be easily user customisable.
- Math Zones – the add-in wraps math zones to show chemical text in the document but we have to use different techniques to show chemical text when not in the document. This gives an inconsistent look and feel (and means that we have to maintain more code). Either we should be using math zones everywhere (which many not be possible) or nowhere. Wrapping the math zones is also (we believe) causing problems with allowing us to do direct editing of the chemistry in the document, rather than having to use modal dialogues.
- Ribbon – The ribbon currently uses customUI which is preventing us from having buttons with dynamic content; and we really want these.
- View Port – what if you don't want to show the whole molecule in the document? We would like to implement a view port concept to enable the user to define the viewable portion.
- Hooks into CML – how should third parties get hold of the CML? And how could they make changes and then give it back to us again which some changes?
- RACSO peak lists – the idea behind this is to be able to convert the spectral data entered by the user into the form currently accepted by the publishers (each publisher has a particular and slightly different house style) in the correct format and insert it into the document. Changing the ChemSS would change the formatting.
- Functional programming and performance - the code has been written in a stateless manner which provides an elegant design but is not optimised for performance. This is entirely in keeping with Donald Knuth's "premature optimization is the root of all evil". However Chem4Word has some areas (systems with many rings, interactive drawing) where many identical calculations are repeated and this is evident in performance). This is an area where modern programming methods (e.g. memoization) should be rewarding.
Contacting The Chem4Word Team
The best way to get in contact with us and to bring up issues or bugs is via the discussions tab or the issue tracker.Join our group on facebook.
Copyright (c) 2011 The Outercurve Foundation. All rights reserved. This code is licensed under the Apache License, Version 2.0. THIS CODE IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR NON-INFRINGEMENT.
This software also makes use of the Microsoft ChemSans and Microsoft ChemSerif font sets which are available at http://research.microsoft.com/chem4word under the Microsoft Research License Agreement.
↧
Commented Unassigned: Cant import from Pubchem [7559]
Hello recently I started using Chem4Word and everything was working fine.
After about a week now when I try to download any chemical from Pubchem I get a 403 server error.
The exact error is:
The remote server returned an error: (403) Forbidden.
I dont know what to do as I have a lab report due quite soon and would like to have nice 2d depictions.
Please help,
Simon
Comments: Hey Simbim, The Beta 1.5 just camed out today and Pubchem is now functional. Uninstall your old version of 1.1 and try 1.5. It works for me. Good luck.
After about a week now when I try to download any chemical from Pubchem I get a 403 server error.
The exact error is:
The remote server returned an error: (403) Forbidden.
I dont know what to do as I have a lab report due quite soon and would like to have nice 2d depictions.
Please help,
Simon
Comments: Hey Simbim, The Beta 1.5 just camed out today and Pubchem is now functional. Uninstall your old version of 1.1 and try 1.5. It works for me. Good luck.
↧